Farnsworth
Специалист
- Регистрация
- 25.08.2009
- Сообщения
- 2 490
- Детектор
- x50
Нашел описание похожего рупора
штыри 80 и 81 являют собой режекторные фильтры на частоты опорного генератора 11.55 ГГц и "зеркальной частоты" 12.58 ГГц
Режекторный фильтр это типа когда все ползунки эквалайзера находятся вверху, а один ползунок внизу, т.е. ослабляется только частота ползунка который внизу.
краткоPins 80, 81 are inserted through slots 82, 83, respectively, and are frictionally held therein by engagement of the splined tops 106 with the edges of slots 82, 83. Slots 82, 83 are located to provide a notch filter at the image frequency (12.58 GHz), and at the LO frequency (11.55 GHz), respectively. It has been discovered that pins 80, 81 can be inserted to fixed distances relative to the inner surface of bottom wall 87 and therefore need not be tunable. Hence, pins 80, 81 can be automatically inserted by a machine thus eliminating certain labor costs and improving reliability. Preferably, pin 80 is inserted to within 0.074 to 0.083 inches of the inner surface of wall 87 to have a resonant frequency at the image frequency. Similarly, pin 81 is inserted to within 0.035 to 0.038 inches of the inner surface of wall 87 to have a resonant frequency at the LO frequency.
штыри 80 и 81 являют собой режекторные фильтры на частоты опорного генератора 11.55 ГГц и "зеркальной частоты" 12.58 ГГц
Режекторный фильтр это типа когда все ползунки эквалайзера находятся вверху, а один ползунок внизу, т.е. ослабляется только частота ползунка который внизу.